Filter cloth products have high dust removal efficiency, low initial resistance, good ventilation and ventilation performance, easy cleaning without knots, seamless mouth, no cracking, high strength, wear resistance, heat resistance, acid resistance, alkali resistance and other excellent performance!
1. The old cloth bags of the new process should not be mixed to avoid different damage time and affecting the normal operation of the dust removal equipment.
2. Aging of cloth bags. Mainly due to the following reasons, a cause investigation must be carried out, elimination measures taken and dust filter bags replaced. Hardening and shrinking due to abnormally high temperature; reaction with vapor contact with acid, alkali or organic solvent; reaction with moisture.
3. The industrial filter cloth should not be hung too tightly or too tightly. It is easy to accumulate dust if it is too loose.
4. The replaced bag should be blown out with compressed air first, and then checked for any holes. After the holes are repaired, they should be replaced. If the bag is covered with dust, rinse it with water and leave it to be replaced after cooling to dry.
5. Blockage of dust bag. When the bag is blocked, the resistance is increased, which can be expressed by the increase of the reading of the differential pressure meter. Clogging of bags is the main reason for the phenomenon of bag wear, perforation and shedding. The cause of the clogging of the dust bag is checked and repaired according to the following table. Generally, the following measures are taken: temporarily strengthen the dust removal to eliminate the clogging of the bag; replace the bag partially or completely; adjust the installation and operating conditions.
Link to this article: http://zapliving.com/hzsl/新浪彩票/2017-8-22/7.html